The new poultry feed pellet making machine has two processing techniques: first mixing, then crushing, and then batch crushing.
According to the ratio of the feed formula, the various feeds are mixed together by a metering device, and then slightly mixed into the feed crusher for crushing. The broken powder enters the feed mixer and is scaled. Mix the premix or trace additive in a mixer to form a powder compound feed.
The process is characterized by simple process, less equipment, saving a lot of batching boxes and reducing civil engineering investment, but the powder raw materials that do not need to be crushed also enter the crusher, which affects the efficiency of the crusher. Increase power consumption. This process is suitable for small feed mills and units, but in Europe it is also used by medium and large poultry feed mills.
First, we will need to crush various feeds. Use the crusher to crush one by one, so that one powder feed enters the ingredient box, and the powder feed that does not need to be crushed enters the individual ingredient box. Since the batching warehouse is measured by the batching scale, it is mixed into the mixer to form a compound feed.
The characteristic of this process is to improve the crushing efficiency of the crusher, but it needs to be equipped with a large number of batching warehouses. The measurement process is complicated and the investment in factory construction is huge. Many new poultry feed pellet making machine manufacturers at home and abroad have adopted this method.
(1) The new poultry feed pellet making machine has a simple and compact structure, wide adaptability, low noise and low failure rate. The operation is simple, the noise is low, no water is added, and the particles are hard and smooth.
(2) Dry in and dry out, all kinds of straw can account for more than 65% after crushing. Grain raw materials such as corn, barley, and rice can be directly processed without crushing. The pellets have low moisture content, which is the national food storage standard.
(3) During the production process, the feed can be matured to not only improve the attractiveness of nutrients, but also kill common pathogens, microorganisms and parasites. It is an important processing equipment that utilizes science and technology to make full use of natural resources for breeding. It is a new generation of home drying products.
(4) The granule formation process can alter pancreatic enzyme resistance factors in grains and beans, reduce adverse effects on digestion, kill various parasite eggs and other pathogenic microorganisms, and reduce various insects and insects. Digestive system diseases. Generally speaking, it is more economical to use a new poultry feed pellet machine to produce feed.
(1) Turn on the power of the poultry feed pelletizer in turn, set the temperature, and pay attention to whether the heating is normal.
(2) Clean the hopper and other devices, the inlet and outlet pipes, and check the oil level and lubrication state of each gear oil, engine oil, and high-temperature butter. The new gear oil should be replaced every six months at the latest, and the moving parts should be lubricated at least once a week.
(3) When the temperature reaches the set temperature, prepare the material and start the main motor in turn.
(4) The poultry feed extruder temperature must reach the set temperature. The feeding device can be opened, the cleaning material or raw material can be poured into the screw, the residue in the screw is cleaned until the new material is extruded, and then the extrudate is suspended, the filter plate and the mold are quickly installed in place. (Related product: cat litter production line)
The die head can be closed. After closing the poultry pellet making machine die, turn on the main screw motor of the feeder. At this point, the operator will stay away from the die to prevent the die from clogging, bursting and injuring personnel. The cutting cover is attached to the tool holder and locked.
(5) After the above operations are in place, turn on all fans>vibrating screen>poultry granulator>host operation in sequence.
(6) When the feed is discharged normally, adjust the poultry feed pellet making machine, stop the frequency conversion speed regulation, and adjust the size of the feed. Before unloading, the screw must rotate the poultry pellet feed granulator. If it is a water-cooled spray poultry feed pellet making machine, you must first fill the pellet cover with water, and then turn on the main unit to stop the official consumption.
(7) Start the main machine of the poultry feed pellet making machine, and adjust the frequency conversion speed of the main machine and the feeding pellet machine slowly and quickly according to the particle size requirements. Only when the two are coordinated, the particle cutting can be more uniform and the particle output can be improved. (For more: Richi Pellet Machine)
(8) The order of stopping the operation is opposite to the order of starting the production. First turn off the main drive, then turn off the power of the auxiliary machine, and then quickly clean the mold to prevent the mold from cooling and blocking (special attention: after each shift operation, the mold is discharged, and the hole and filter plate must be cleaned before reinstallation and consumption, otherwise the mold head may be will explode due to clogging). ”
For the above operating points, the operator of the poultry feed pellet making machine must always remember, otherwise it is easy to cause machine damage and accidents. For customers who purchase Richi Machinery poultry feed making machine, we provide professional detailed instructions on the operation process. You can contact Richi Pellet Machinery if you need it.
1. Composition of fertilizer pelletizer machine production line Users who know and are familiar with…
Richi Machinery mainly develops and sells fish feed machines, large floating fish feed making machines,…
Many customers who are making pellets for the first time will always have various problems…